Z-Wave Temperature Probe
External temperature probe for use with Secure Wall Switch
Easy fit for new and replacement installations
Used for pipe and hot water tank temperature sensing
Temperature sensing for underfloor heating
- Probe diameter: 5 mm
- Probe length: 20 mm
- Cable length: 3 m
- Temperature range: -40 ºC to +125 ºC
- Breaking strain: >200 N
- Dielectric strength: >2.75 kV AC
- Insulation resistance: 100 MΩ@ 500 V DC
- Environmental rating: IP 68
Z-Wave Popp Heating Thermostat – a Z-Wave controlled electronic radiator thermostat
- Now with increased network stability
- Mounted on wall heating valves and controls them by a motor
- Ensures that the temperature in the room is kept at the desired level
- LCD panel on the device displays the setpoint temperature
- Up to 9 setpoint for up to 7 week days
- Special heating schemes – energy saving and frost protection and intelligent functions such as detection of open windows
This 3 amp rated two channel RF switch is an ideal way to replace wired heating controls that require a separate hotwater control with a wireless solution.
Activated using a Z-Wave controller or Thermostat or Thermostat/Timer
Controls boilers or magnetic valves
On/Off buttons for manual control of heating and hot water
Make your home smart with Aeon MultiSensor 6
Aeotec 6 in 1 Multisensor combines motion detection, temperature, humidity and light level sensors into one battery or USB powered device for indoor or outdoor use.
Motion, Temperature, Humidity, Light, UV and Vibration Sensors
Longer Battery Life
Extremely versatile 3-in-1 Z-Wave sensor combining movement, temperature and binary sensor functions.
The Door / Window Sensor is a battery powered reed sensor that expands the capabilities of the system by monitoring the state of doors, windows, garages and other apertures.
The sensor can be used to automatically turn a light on when you enter a room, guard against unauthorised access, warn you if you leave your front door open when you leave the house or even reduce your heating bills by excluding zones with open windows from the heating programme.
Detects window or door opening – increasing security
Monitor any room’s temperature with the DS18B20 sensor
Add any external binary sensor to the Z-Wave network
Easily fitted to any door, window, gate or blind
The Door/Window sensor includes support for an optional temperature sensor.
Enables binary sensors to work with a Z-Wave network.
The Universal Binary Sensor is a wireless module that allows you to bridge the output of any binary sensor onto the Z-Wave network and incorporate it into your Fibaro system. The module supports up to two binary sensors and four temperature sensors. The Universal Binary Sensor allows advanced users to quickly and easily incorporate alarm systems, infra-red receivers and other third-party devices into a Fibaro Z-Wave network.
Supports 2 binary sensors or 4 temperature sensors
Works with an Z-Wave network
Easy DIY Installation