Z-Wave Popp Wall Controller
Z-Wave Popp Wall controller is a 4-button remote control that lets you manage all the connected Z-Wave devices in your home automation network. The smart wall controller can either function as the primary controller, allowing you to switch devices directly without a smart home center (gateway), or it can be configured to work as secondary mobile controller in your Z-Wave network (through a primary gateway).
Works as primary/secondary controller
Controls Z-Wave Devices
Triggers predefined scenes
Easy Wireless Installation
Control Z-Wave devices wirelessly
Adding and managing individual Z-Wave devices like door locks, switches, dimmers, etc. is simple, convenient and easy with Z-Wave Popp Wall controller. The four-buttons on the smart remote controller can be configured to wirelessly control Z-Wave devices within a range of 20 meters.
Trigger Customized Scenes
Besides controlling Z-Wave devices directly, the smart controller also lets you trigger customized scenes, allowing you to manage multiple Z-Wave devices on press of a button.
Superior Battery Life
Popp Wall controller comes optimizes energy management to provide a sustainable battery life of more than two years.
The device uses secure communication protocols while communicating with sensitive Z-Wave devices like door locks or security cameras. In case the device does not support the enhanced security protocols, it also comes with backward compatibility for controlling normal Z-Wave devices.
Since Z-Wave Popp Wall controller works wirelessly and is powered by batteries, it can be installed easily and conveniently in any corner of your room, without the need for extensive wiring.
- Frequency: Z-Wave 868.42 MHz
- IP Rating: IP 20
- Battery Type: 1 * CR2032
- Wireless Range: Up to 100 m outside, on average up to 20 m inside buildings
- Explorer Frame Support: No
- Device Type: Portable Controller
- Routing: No
- FLiRS: No
- Firmware Version: 1.3
- Battery Life > 2 years